Draytek Router Setup for GigaFast FTTP
Make sure the router has the latest firmware.
Here we have configured a Draytek Vigor 2866 series which is very common in the market.
Under WAN > General Setup configure your WAN Port with Customer VLAN TAG of 911
Under WAN > Internet Access. If the IP is dynamic select Obtain
an IP address automatically. If you’ve been issued with a static IP Address
then you can enter the details here. Make sure that Gateway and Subnet Mask are entered correctly.
Related Articles
Setting up TP Link for GigaFast Services
If you want too use your own TP Link router on one of our CityFibre circuits you will need to set it up to use DHCP Authentication using VLAN ID 911. Under your Internet Connection settings set connection type to "Dynamic IP" Enable IPTV/VLAN, and ...What kind of speeds should I be expecting with your GigaFast service?
If you are using a wired connection on a 1Gbps ethernet port plugged directly into the WiFi the maximum speed you will receive will be 900Mbps, however, as the Fibre is a shared access service and you will have multiple devices connected to the ...I don't think I'm getting the speeds I'm paying for
Lot's of things can affect your speeds and most of them are to do with how you are accessing the internet and what speedtest server you are using. To get the best possible speedtest results you should be connecting via a wired connection directly ...Apple and Android WiFi Privacy causes WiFi Performance issues
WiFi Privacy or Randomised Mac addresses can cause significant performance problems in Home WiFi networks. Most modern devices such as the newer iPhones and Android devices have a setting that allows you to hide your devices MAC address from the ...Connecting the FRITZ!Repeater with the FRITZ!Box via Wi-Fi
Connect your FRITZ!Repeater to your FRITZ!Box via Wi-Fi to increase the Wi-Fi range of your home network easily and efficiently. If you are using a FRITZ!Box with FRITZ!OS 7 or later, the FRITZ!Repeater is automatically integrated into the Mesh and ...